CROMAROD® 316L is a rutile flux coated AC/DC electrode intended for welding the low carbon, molybdenum alloyed, acid resisting austenitic stainless steels of similar composition (316L). Operability is excellent with a smooth low spatter arc producing an exceptionally good weld bead appearance. Fillet welds have a smooth surface, slightly concave profile with excellent toe line …
Continue reading „CROMAROD® 316L“
CROMAMIG 2507 deposits a 25%Cr/9%Ni/4%Mo/0.25% N super duplex type weld metal with a ferrite level of approximately FN 55. It is designed for welding similar composition steels e.g. SAF 2507, Uranus 52N, Zeron 100, which offer even higher strength and corrosion resistance levels than the ordinary duplex grades. CROMAMIG 2507 may also be used for …
Continue reading „CROMAMIG 2507“
CROMAROD® 2507R is a rutile flux coated electrode which deposits a 25%Cr/ 9.0%Ni / 4.0%Mo / 0.25%N super dupex type stainless steel weld metal with a ferrite content of approximately FN 57. The electrode is designed for welding similar composition steels e.g. SAF 2507, Uranus 52N, Zeron 100, which offer even higher strength and corrosion …
Continue reading „CROMAROD® 2507R“
CROMAMIG 307Si produces a tough, ductile, 19% Cr / 9% Ni / 7% Mn austenitic stainless weld metal which is highly crack resistant. It is intended for joining hardenable steels, armour plate, 13% Mn steels and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar joints between stainless and mild or …
Continue reading „CROMAMIG 307Si“
CROMAMIG 308LSi is primarily intended for welding the low carbon 18% Cr / 10% Ni type 304 L austenitic stainless steels. Suitable also for welding normal carbon grade 304 and Nb or Ti stabilised steels (347, 321) provided service temperatures are below 400°C. The higher silicon content gives better arc stability and weld metal flow …
Continue reading „CROMAMIG 308LSi“
CROMAMIG 309LSi deposits a 23% Cr / 13% Ni austenitic stainless steel weld metal with a ferrite content of about FN 11. The high alloy level and high ferrite content enables the weld metal to tolerate dilution from carbon and low alloy steels without hot cracking. The higher silicon content gives better arc stability and weld …
Continue reading „CROMAMIG 309LSi“
