MEGAFIL®A 864 M is a high-alloy metal cored wire for hardfacing using Ar-CO2 mix. Can also be used without shielding gas. The hardfacing contains sufficient special carbides formed with boron and therefore has excellent resistance to abrasion from sand and minerals. The weld metal is machinable only by grinding. Stringer bead technique is recommended. The …
Continue reading „MEGAFIL® A 864 M“
MEGAFIL® 710 M is a seamless metal cored wire with remarkable stable arc and no spatters. Excellent for use in automated welding applications such as orbital Mag or robotic welding. This wire offers a complete third party approvals coverage that anables you to use only one wire to cover more procedures up to 460 N …
Continue reading „MEGAFIL® 710 M“
MEGAFIL® 240 M is is a seamless metal cored wire designed for welding low alloy steels with around a 1% Ni deposit and applications where low temperature toughness down to -60 ºC is required. The low level of diffusible hydrogen typiccally below 3 ml / 100 g weld metal minimizes the risk of hydrogen-induced cracking. …
Continue reading „MEGAFIL® 240 M“
MEGAFIL® 281 M is a seamless metal cored wire for which deposits 0.7%Ni/0.5%Cr/0.5%Cu weld metal designed for weather-resisting steels similar to Cor-Ten. Diffusible hydrogen levels will be less than 4ml/100g of deposited weld metal giving it more resistance to cracking. Suitable for robot applications and ideal for use in short and spray arc. Excellent impact …
Continue reading „MEGAFIL® 281 M“
MEGAFIL® 742 M is a high performance metal cored wire for high strength steels with SMYS exceeding 690MPa. Suitable for robot applications automatic root welding without backing possible. The low diffusible hydrogen levels and the excellent values of impact properties down to -60°C makes this wire ideal for application in extreme climatic conditions. Applications: HSLA …
Continue reading „MEGAFIL® 742 M“
MEGAFIL® 1100 M is a high performance metal cored wire for high strength steels with SMYS exceeding 800 MPa, such as ASTM 514, HY-100 and T1 steels. Diffusible hydrogen levels will be less than 4ml/100g of deposited weld metal giving it more resistance to cracking. Suitable for robot applications and ideal for use in short …
Continue reading „MEGAFIL® 1100 M“
