MEGAFIL® A 760 M is a metal-cored semaless wire designed for wear resisting parts subject to heavy impact and shock. The interpass temperature should be maximum 250 °C (482 °F). The weld metal requires no buffer layer except on materials considered critical. In this situation, MEGAFIL® 731 B is sugegsted to be used as a …

Continue reading „MEGAFIL® A 760 M“

MEGAFIL® A 867 M is a high-alloy metal cored wire for hardfacing using Ar-CO2 mix. Can also be used without shielding gas. Microstructure consisting of special boron based carbides in combination with Chromium carbides providing an excellent resistance to abrasion from sand and minerals. The weld metal is machinable only by grinding. Stringer bead technique …

Continue reading „MEGAFIL® A 867 M“

MEGAFIL® 940M is a metal-cored seamless wire which deposits a 2,5%Ni type weld metal. It is intended for welding High Strengh Steels > 550MPa such as HY 80. MEGAFIL® 940M offers consistent impact properties down to -60°C. MEGAFIL® 940M is WIWEB approved. Diffusible hydrogen levels will be less than 4ml/100g of deposited weld metal giving …

Continue reading „MEGAFIL® 940 M“

Features: Extremely low diffusible hydrogen weld deposit Good reignition characteristics Ideal for use of short arc and spray arc Excellent gap bridging for root welding High deposition rate and efficiencies Virtually no slag coverage Smooth arc characteristic

Features: Well suited for wear resisting parts subject to impact Good reignition characteristics Virtually no slag coverage Smooth arc characteristic

Features: Well suited for wear resisting parts subject to heavy impact Good reignition characteristics Virtually no slag coverage Smooth arc characteristic