CrInoxMIG 309LSi deposits a 23% Cr / 13% Ni austenitic stainless steel weld metal. The high alloy level and high ferrite content enables the weld metal to tolerate dilution from carbon and low alloy steels without hot cracking. The higher silicon content gives better arc stability and weld metal flow which improves bead appearance, particularly …
Continue reading „CrInoxMIG 309LSi“
CrInoxMIG 308LSi is primarily intended for welding the low carbon 18% Cr / 10% Ni type 304 L austenitic stainless steels. Suitable also for welding normal carbon grade 304 and Nb or Ti stabilised steels (347, 321) provided service temperatures are below 400°C. The higher silicon content gives better arc stability and weld metal flow …
Continue reading „CrInoxMIG 308LSi“
CrInoxMIG 316LSi is primarily intended for welding the low carbon, molybdenum alloyed, acid resisting 316L austenitic stainless steels of similar composition. Suitable also for welding 304L type steels as well as normal carbon 316 grades and Nb or Ti stabilised steels provided service temperatures are below 400°C. The higher silicon content gives better arc stability …
Continue reading „CrInoxMIG 316LSi“
CROMAMIG 2507 deposits a 25%Cr/9%Ni/4%Mo/0.25% N super duplex type weld metal with a ferrite level of approximately FN 55. It is designed for welding similar composition steels e.g. SAF 2507, Uranus 52N, Zeron 100, which offer even higher strength and corrosion resistance levels than the ordinary duplex grades. CROMAMIG 2507 may also be used for …
Continue reading „CROMAMIG 2507“
Aluminium MIG wire containing 5% Magnesium for welding similar composition Al-Mg and Al-Mg-Si materials. The high strength weld metal has very good corrosion resistance in marine environments. Excellent colour match with material to be anodised. The most versatile and universally used aluminium filler material. Melting range 560-630°C.
