CROMAMIG DUPLEX deposits a 23% Cr / 9% Ni / 3% Mo / N austenitic/ferritic duplex stainless steel weld metal with a ferrite content of about FN 35. It is intended for welding similar composition duplex stainless steels which offer an excellent combination of much higher strength and very good resistance to pitting and stress …

Continue reading „CROMAMIG DUPLEX“

Aluminium MIG wire containing 3,2% Magnesium for welding similar composition materials. The medium strength weld metal has good corrosion resistance in marine environments. Excellent colour match with material to be anodised. Melting range 590-650 °C.

ELGALOY HARD M60 is a solid wire producing a martensitic weld metal with a hardness of 55-60 HRC. The deposit exhibits a good wear resistance under conditions of abrasion and friction coupled with moderate impact and can be shaped by grinding.

ELGAMATIC 100 is a copper coated, manganese-silicon double deoxidised mild steel wire for use with a CO2 or Ar/CO2 gas shield. The carefully controlled wire metallurgy and surface finish ensure high quality welds and reliable wire feed for mechanised welding systems. ELGAMATIC 100 is suitable for all general engineering and structural steels.

CROMAMIG 625 is primarily intended for welding Inconel 625 and similar composition nickel base alloys which are used for their excellent corrosion and oxidation resistance combined with an exceptionally high resistance to pitting corrosion and chloride induced stress corrosion cracking. Very suitable for a wide range of dissimilar joint combinations between nickel base alloys, mild …

Continue reading „CROMAMIG 625“

ELGAMATIC 103 is a copper coated, manganese-silicon double deoxidised wire of the G4Si1 type, for use with a CO2 or Ar/CO2 gas shield. The increased Mn content produces a higher weld metal strength level and better notch toughness compared to G3Si1 type wire. ELGAMATIC 103 is suitable for all general engineering and structural steels.