CROMATIG 309L deposits a 24% Cr / 13% Ni austenitic stainless steel weld metal with a ferrite content of about FN 11. The high alloy level and high ferrite content enables the weld metal to tolerate dilution from carbon and low alloy steels without hot cracking.

ELGATIG 100 is a silicon, manganese double deoxidised welding wire suitable for high integrity TIG welding of mild and medium tensile steels. It is recommended for Si-killed materials.

ELGATIG 183CR is a 1.25% Cr/0.5% Mo alloyed wire intended for TIG welding creep resisting steels of similar composition, used in power generation plant operating at temperatures up to 570°C, e.g. DIN 13 CrMo 44, GS-17 CrMo 55, BS 3604 Grades 620 and 621 etc. Also suitable for use in the chemical and petrochemical industries …

Continue reading „ELGATIG 183CR“

ELGATIG 181CR is a 0.5% Mo alloyed wire intended for TIG welding similar composition steels, used where creep rupture strength and ductility at service temperatures up to 550°C are required, e.g. DIN 15 Mo3, BS 3059 Grade 243 and ASTM A335 Grade P1. The Mo content confers some resistance to hydrogen attack in chemical process …

Continue reading „ELGATIG 181CR“

ELGATIG 101 is a silicon , manganese double deoxidised welding wire suitable for high integrity TIG welding of mild and medium tensile steels. It is recommended for Si-killed materials. It has lower levels of Si and Mn than ELGATIG 100.

CROMATIG 625 is primarily intended for welding Inconel 625 and similar composition nickel base alloys which are used for their excellent corrosion and oxidation resistance combined with an exceptionally high resistance to pitting corrosion and chloride induced stress corrosion cracking. Very suitable for a wide range of dissimilar joint combinations between nickel base alloys, mild …

Continue reading „CROMATIG 625“