Basic coated stainless steel electrode for type 304L/304LN steel grades. Produces weld metal with higher touhgness at lower temperatures compared to rutile coated electrodes. The basic coating results in higher resistance to porosity due to improved gas shield, making the electrode highly suitable for on site welding. CROMAROD® B308L has an easy slag removal even …
Continue reading „CROMAROD® B308L“
Basic coated stainless steel electrode for type 316L steel grades. Produces weld metal with higher touhgness at lower temperatures compared to rutile coated electrodes. The basic coating results in higher resistance to porosity due to improved gas shield, making the electrode highly suitable for on site welding. CROMAROD® B316L has an easy slag removal even …
Continue reading „CROMAROD® B316L“
CROMAROD® DUPLEX is a rutile flux coated electrode which deposits a 24%Cr / 10%Ni / 3%Mo / 0.15%N austenitic-ferritic duplex stainless steel weld metal having a ferrite content of about FN 35. The electrode is easy to use and p roduces a smooth weld bead finish and good slag detachability. CROMAROD® DUPLEX is designed for …
Continue reading „CROMAROD® DUPLEX“
CROMAROD® DUPLEX B is a basic flux coated electrode intended for welding similar composition duplex stainless steels e.g. 1.4462, UNS 31803. The basic coating design produces a very low micro-oxide level in the deposit, giving excellent fracture toughness at temperatures down to -46 °C. Duplex stainless steels offer an excellent combination of high strength and …
Continue reading „CROMAROD® DUPLEX B“
CROMAROD® DUPLEX LP is a fully positional rutile flux coated electrode designed specially for pipe-welding. It has a thin coating and fast-frezing slag, making it ideal for root runs. The electrode is intended for welding similar composition duplex stainless steels, e.g. 1.4462, UNS 31803. With thicker walled pipe it can be advantageous to use CROMAROD® …
Continue reading „CROMAROD® DUPLEX LP“
MAXETA™ 10 is rutile-coated iron powder electrode with 135% recovery intended for welding medium thick sections in general construction steels. The electrode design has been optimised to produce fillet welds with a good mitre profile and throat thickness in the 3.5-4.0 mm range. MAXETA™ 10 produces a finely rippled bead surface, minimum spatter and a …
