P 81CR is a basic-coated, low hydrogen electrode which deposits a 0.5% Mo type weld metal. It is primarily intended for welding similar composition steels, used where creep rupture strength and ductility at service temperatures up to 550°C are required e.g. EN 16Mo3 and ASTM A335 Grade P1. The Mo content confers some resistance to …
ELGALOY CAST-Ni is a pure nickel electrode for general purpose welding of all types of cast iron. It is suitable for the joining and repair of grey and malleable cast irons and dissimilar joints between these and steel, monel and stainless steels. The electrode will tolerate dirty and contaminated surfaces. No preheat is required for …
Continue reading „ELGALOY CAST-Ni“
ELGALOY CAST-NiFe is designed to produce a higher, matching strength weld metal for joining malleable, nodular and S.G. irons. It is also suitable for joining these to mild, low alloy and stainless steels. ELGALOY CAST-NiFe is less sensitive to hot cracking sometimes caused by impurities in castings, compared to pure nickel type electrodes. Thin sections …
Continue reading „ELGALOY CAST-NiFe“
ELGALOY HARD 100 is a high recovery electrode, producing a weld metal deposit extremely rich in chromium carbides which is highly resistant to abrasion but exhibits limited impact resistance. Ideal for hardsurfacing components used in the mining and quarrying industries. Good wear and corrosion resistance at elevated temperatures. Surface cracking is normal and can be …
Continue reading „ELGALOY HARD 100“
ELGALOY MIX 18 is a rutile-coated, 160% recovery electrode of the 307 type, intended for joining and building up 13% Mn steels and welding armour plate and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar joints between stainless and mild or medium carbon steels. Welds produced with ELGALOY MIX 18 …
Continue reading „ELGALOY MIX 18“