exclusion

MEGAFIL® A 750 M

Features: Well suited for wear resisting parts subject to heavy impact Good reignition characteristics Virtually no slag coverage Smooth arc characteristic

MEGAFIL® A 740 M

Features: Well suited for wear resisting parts subject to heavy impact Good reignition characteristics Virtually no slag coverage Smooth arc characteristic

MEGAFIL® A 730 M

Features: Well suited for wear resisting parts subject to impact Good reignition characteristics Virtually no slag coverage Smooth arc characteristic

ELGALOY HARD M60

ELGALOY HARD M60 is a solid wire producing a martensitic weld metal with a hardness of 55-60 HRC. The deposit exhibits a good wear resistance under conditions of abrasion and friction coupled with moderate impact and can be shaped by grinding.

ELGALOY MIX 18B

ELGALOY MIX 18B is an all positional basic-coated electrode which deposits a 19% Cr / 9% Ni / 6% Mn fully austenitic stainless steel weld metal with excellent toughness and crack resistance. It is intended for joining hardenable steels, armour plate, 13% Mn steels and difficult-to-weld steels, without the need for preheat. It is also …

ELGALOY MIX 18

ELGALOY MIX 18 is a rutile-coated, 160% recovery electrode of the 307 type, intended for joining and building up 13% Mn steels and welding armour plate and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar joints between stainless and mild or medium carbon steels. Welds produced with ELGALOY MIX 18 …