exclusion

ELGALOY HARD 100

ELGALOY HARD 100 is a high recovery electrode, producing a weld metal deposit extremely rich in chromium carbides which is highly resistant to abrasion but exhibits limited impact resistance. Ideal for hardsurfacing components used in the mining and quarrying industries. Good wear and corrosion resistance at elevated temperatures. Surface cracking is normal and can be …

ELGALOY HARD 60

ELGALOY HARD 60 produces a martensitic weld metal with a hardness of about 57-60 HRC. The crack-free deposit has good wear resistance under conditions of abrasion and friction coupled with moderate impact. Also available as solid wires ELGALOY M60 and Metal Cored Wire MEGAFIL® 760 M.

MEGAFIL® A 867 M

MEGAFIL® A 867 M is a high-alloy metal cored wire for hardfacing using Ar-CO2 mix. Can also be used without shielding gas. Microstructure consisting of special boron based carbides in combination with Chromium carbides providing an excellent resistance to abrasion from sand and minerals. The weld metal is machinable only by grinding. Stringer bead technique …

MEGAFIL® A 864 M

MEGAFIL® A 864 M is a high-alloy metal cored wire for hardfacing using Ar-CO2 mix. Can also be used without shielding gas. The hardfacing contains sufficient special carbides formed with boron and therefore has excellent resistance to abrasion from sand and minerals. The weld metal is machinable only by grinding. Stringer bead technique is recommended. …

MEGAFIL® A 760 M

MEGAFIL® A 760 M is a metal-cored semaless wire designed for wear resisting parts subject to heavy impact and shock. The interpass temperature should be maximum 250 °C (482 °F). The weld metal requires no buffer layer except on materials considered critical. In this situation, MEGAFIL® 731 B is sugegsted to be used as a …

VertiWear® 600

VertiWear® 600 deposits a multi-purpose martensitic steel alloy. It has excellent operator appeal in all positions and can be used to surface mild and low alloy steel components subject to moderate abrasive wear and medium to high impact. Deposits can be applied crack-free in multiple layers with proper procedures. VertiWear® 600 is a gas-shielded, flux-cored, …