CROMAROD® 316L is a rutile flux coated AC/DC electrode intended for welding the low carbon, molybdenum alloyed, acid resisting austenitic stainless steels of similar composition (316L). Operability is excellent with a smooth low spatter arc producing an exceptionally good weld bead appearance. Fillet welds have a smooth surface, slightly concave profile with excellent toe line …
Continue reading “CROMAROD® 316L”
CROMATIG 307Si produces a tough, ductile, 19% Cr / 9% Ni / 7% Mn austenitic stainless weld metal which is highly crack resistant. It is intended for joining hardenable steels, armour plate, 13% Mn steels and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar joints between stainless and mild or …
Continue reading “CROMATIG 307Si”
CROMATIG DUPLEX deposits a 23% Cr / 9% Ni / 3% Mo / N austenitic/ferritic duplex stainless steel weld metal with a ferrite content of about FN 35. It is intended for welding similar composition Duplex stainless steels which offer an excellent combination of much higher strength and very good resistance to pitting and stress corrosion …
Continue reading “CROMATIG DUPLEX”
CROMATIG 385 is intended for welding the 20% Cr / 25% Ni / 4.5% Mo / Cu fully austenitic stainless steels, used for their very high resistance to corrosion in severe, non-oxidising environments e.g. sulphuric acid. The low carbon, high alloy content of the weld metal gives excellent resistance to intergranular corrosion and stress corrosion …
Continue reading “CROMATIG 385”
