CrInoxMIG 309LSi deposits a 23% Cr / 13% Ni austenitic stainless steel weld metal. The high alloy level and high ferrite content enables the weld metal to tolerate dilution from carbon and low alloy steels without hot cracking. The higher silicon content gives better arc stability and weld metal flow which improves bead appearance, particularly …
Continue reading “CrInoxMIG 309LSi”
CrInoxMIG 308LSi is primarily intended for welding the low carbon 18% Cr / 10% Ni type 304 L austenitic stainless steels. Suitable also for welding normal carbon grade 304 and Nb or Ti stabilised steels (347, 321) provided service temperatures are below 400°C. The higher silicon content gives better arc stability and weld metal flow …
Continue reading “CrInoxMIG 308LSi”
CrInoxMIG 316LSi is primarily intended for welding the low carbon, molybdenum alloyed, acid resisting 316L austenitic stainless steels of similar composition. Suitable also for welding 304L type steels as well as normal carbon 316 grades and Nb or Ti stabilised steels provided service temperatures are below 400°C. The higher silicon content gives better arc stability …
Continue reading “CrInoxMIG 316LSi”
ELGAMATIC 135 is a copper coated wire for use with the MIG/MAG process, which deposits a 1.5% Ni / 0.3% Mo / 0.2% Cr weld metal. It is intended for welding the high tensile quenched and tempered steels such as Weldox 700, BSC RQT 701, N-A-XTRA 70 and USS T1. ELGAMATIC 135 can be welded with …
Continue reading “ELGAMATIC 135”
ELGAMATIC 162 is a copper coated wire depositing a nominal 0.9% Ni weld metal. It has a guaranteed Ni content of 1% maximum, ensuring conformance to NACE requirements for oil and gas production equipment in sour service. The wire is primarily intended for GMAW but is equally suitable for use in mechanised GTAW eg. orbital …
Continue reading “ELGAMATIC 162”
ELGAMATIC 103 is a copper coated, manganese-silicon double deoxidised wire of the G4Si1 type, for use with a CO2 or Ar/CO2 gas shield. The increased Mn content produces a higher weld metal strength level and better notch toughness compared to G3Si1 type wire. ELGAMATIC 103 is suitable for all general engineering and structural steels.
