CROMAMIG 625 is primarily intended for welding Inconel 625 and similar composition nickel base alloys which are used for their excellent corrosion and oxidation resistance combined with an exceptionally high resistance to pitting corrosion and chloride induced stress corrosion cracking. Very suitable for a wide range of dissimilar joint combinations between nickel base alloys, mild …
Continue reading “CROMAMIG 625”
ELGAMATIC 100 is a copper coated, manganese-silicon double deoxidised mild steel wire for use with a CO2 or Ar/CO2 gas shield. The carefully controlled wire metallurgy and surface finish ensure high quality welds and reliable wire feed for mechanised welding systems. ELGAMATIC 100 is suitable for all general engineering and structural steels.
CROMAMIG DUPLEX deposits a 23% Cr / 9% Ni / 3% Mo / N austenitic/ferritic duplex stainless steel weld metal with a ferrite content of about FN 35. It is intended for welding similar composition duplex stainless steels which offer an excellent combination of much higher strength and very good resistance to pitting and stress …
Continue reading “CROMAMIG DUPLEX”
CROMAMIG 385 is intended for welding the 20% Cr / 25% Ni / 4.5% Mo / Cu fully austenitic stainless steels, used for their very high resistance to corrosion in severe, non-oxidising environments e.g. sulphuric acid. The low carbon, high alloy content of the weld metal gives excellent resistance tointergranular corrosion and stress corrosion cracking, …
Continue reading “CROMAMIG 385”
CROMAMIG 347Si is primarily intended for welding the Nb or Ti stabilised 18% Cr/ 10% Ni austenitic stainless steel grades 347 and 321. It is also suitable for the unstabilised grades 304 and 304L. The higher silicon content gives better arc stability and weld metal flow which improves bead appearance, particularly when dip transfer welding. …
Continue reading “CROMAMIG 347Si”
