CROMAMIG 318Si is designed for welding the Nb or Ti stabilised 18% Cr/12% Ni/3% Mo austenitic stainless steel grades 316 Cb and 316Ti. It is primarily intended for use at service temperatures above 400°C, but for structural applications at elevated temperatures the creep strength of the weld metal should always be considered. CROMAMIG 318Si is …
Continue reading “CROMAMIG 318Si”
CROMAMIG 316LSi is primarily intended for welding the low carbon, molybdenum alloyed, acid resisting 316L austenitic stainless steels of similar composition. Suitable also for welding 304L type steels as well as normal carbon 316 grades and Nb or Ti stabilised steels provided service temperatures are below 400°C. The higher silicon content gives better arc stability …
Continue reading “CROMAMIG 316LSi”
CROMAMIG 316L is primarily intended for welding the low carbon, molybdenum alloyed, acid resisting 316L austenitic stainless steels of similar composition. Suitable also for welding normal carbon 316 grades and Nb or Ti stabilised steels provided service temperatures are below 400°C. CROMAMIG 316L is primarily intended for welding the low carbon, molybdenum alloyed, acid resisting …
Continue reading “CROMAMIG 316L”
CROMAMIG 312 deposits a 29% Cr / 9% Ni austenitic/ferritic stainless steel weld metal with a ferrite content of about FN 40. The weld metal exhibits excellent tolerance to dilution from dissimilar and difficult-to-weld base materials without hot cracking, together with high strength and very good heat and oxidation resistance. CROMAMIG 312 deposits a 29% …
Continue reading “CROMAMIG 312”
CROMAMIG 310 is primarily intended for welding the 25% Cr / 20% Ni, type 310, fully austenitic stainless steels, used for corrosion and oxidation resistance at elevated temperatures. Suitable also for joining difficult-to-weld steels such as armour plate and ferritic stainless steels as well as dissimilar steels. CROMAMIG 310 is primarily intended for welding the …
Continue reading “CROMAMIG 310”
CROMAMIG 309MoL deposits a 23% Cr / 12% Ni / 2.5% Mo austenitic stainless steel weld metal. The high alloy content and ferrite level enable the weld metal to tolerate dilution from dissimilar and difficult-to-weld materials without hot cracking. CROMAMIG 309MoL deposits a 23% Cr / 12% Ni / 2.5% Mo austenitic stainless steel weld …
Continue reading “CROMAMIG 309MoL”
