CROMAMIG 309LSi deposits a 23% Cr / 13% Ni austenitic stainless steel weld metal with a ferrite content of about FN 11. The high alloy level and high ferrite content enables the weld metal to tolerate dilution from carbon and low alloy steels without hot cracking. The higher silicon content gives better arc stability and weld …
Continue reading “CROMAMIG 309LSi”
CROMAMIG 308LSi is primarily intended for welding the low carbon 18% Cr / 10% Ni type 304 L austenitic stainless steels. Suitable also for welding normal carbon grade 304 and Nb or Ti stabilised steels (347, 321) provided service temperatures are below 400°C. The higher silicon content gives better arc stability and weld metal flow …
Continue reading “CROMAMIG 308LSi”
CROMAMIG 307Si produces a tough, ductile, 19% Cr / 9% Ni / 7% Mn austenitic stainless weld metal which is highly crack resistant. It is intended for joining hardenable steels, armour plate, 13% Mn steels and difficult-to-weld steels, without the need for preheat. It is also recommended for dissimilar joints between stainless and mild or …
Continue reading “CROMAMIG 307Si”
Aluminium MIG wire containing 5% Magnesium for welding similar composition Al-Mg and Al-Mg-Si materials. The high strength weld metal has very good corrosion resistance in marine environments. Excellent colour match with material to be anodised. The most versatile and universally used aluminium filler material. Melting range 560-630°C.
