CROMATIG DUPLEX deposits a 23% Cr / 9% Ni / 3% Mo / N austenitic/ferritic duplex stainless steel weld metal with a ferrite content of about FN 35. It is intended for welding similar composition Duplex stainless steels which offer an excellent combination of much higher strength and very good resistance to pitting and stress corrosion …
Continue reading “CROMATIG DUPLEX”
CROMATIG 385 is intended for welding the 20% Cr / 25% Ni / 4.5% Mo / Cu fully austenitic stainless steels, used for their very high resistance to corrosion in severe, non-oxidising environments e.g. sulphuric acid. The low carbon, high alloy content of the weld metal gives excellent resistance to intergranular corrosion and stress corrosion …
Continue reading “CROMATIG 385”
CROMATIG 318Si is designed for welding the Nb or Ti stabilised 18% Cr/12% Ni/3% Mo austenitic stainless steel grades 316 Cb and 316 Ti. It is primarily intended for use at service temperatures above 400°C, but for structural applications at elevated temperatures the creep strength of the weld metal should always be considered.
CROMATIG 316LSi is primarily intended for welding the low carbon, molybdenum alloyed, acid resisting 316L austenitic stainless steels of similar composition. It is also suitable for grade 316 material and the Nb or Ti stabilised grades 347 and 321, provided service temperatures for structural work are below 350 °C. The higher silicon content provides a …
Continue reading “CROMATIG 316LSi”
CROMATIG 310 is primarily intended for welding the 25% Cr / 20% Ni type 310 fully austenitic stainless steels, used for corrosion and oxidation resistance at elevated temperatures. Suitable also for joining difficult-to-weld steels such as armour plate and ferritic stainless steels as well as dissimilar steels.
